Ceramic Drum Lagging
Ceramic lagging rubber sheet with chloroprene bonding layer is used as a protective surface to improve and extend pulley life in applications for extreme conditions in wet and muddy areas.
UK Rubber Belting’s ceramic lagging is made with high quality alumina tiles, high quality abrasion resistant rubber and back with a chloroprene bonding layer.
The USP of our ceramic lagging is its 500mm width and 10m length.
- Improves belt traction
- Non slip grip between ceramic lagging and belt
- Reduces belt slippage
- Increase belt and pulley life
- Minimizes system downtime
- Increases productivity
- High resistance to wear
|Code||Thickness (mm)||Width (mm)||Length (mm)|
Note: Custom width and length also available.
|Aluminium Oxide AL2O3||95% (min)|
|Density (g/cc)||3.65 (min)|
|Hardness (R45N)||77 (min)|
|Flexural Strength (Mpa)||240 (min)|
|Abrasion by Rubbing (g)||0.1 (max)|
|Hardness (Shore ‘A’)||65+/-5|
|Density (g/cc)||1.12 to 1.17|
|Tensile Strength (Mpa)||20.0 (min)|
|Elongation (min)||400% (min)|
|Abrasion (mm3)||120 (max)|
Comparison Table for Co-efficient of Friction
|Co-efficient of Friction||Rubber Lagging||Ceramic Lagging|